Mackie HD1221 powered speaker

From: $50.00

Mackie HD1221 12″ 2-Way Compact High-Definition 1200 watt Powered Loudspeaker/monitor

SKU: hd1221 Category:

Description

FEATURES
1200W of ultra-efficient Class-D Fast Recovery amplification:
LF 500W RMS / 1000W peak
HF 100W RMS / 200W peak
High-definition digital processing includes:
Revolutionary patented acoustic correction
Transducer time alignment and phase correction
Precision 2-way crossover
Custom designed transducers by EAW:
12″ neodymium woofer with 3″ voice coil
1.75″ compression driver with heat-treated titanium diaphragm
Custom designed user rotatable 90 x 50 horn
60 degree monitor angle for maximum coverage on stage
Triple voicing modes for easy system tuning
Ultra-compact and lightweight
Integrated limiting and protection circuitry
Rugged all wood cabinet (15mm birch)
12 integrated fly points for horizontal and vertical rigging

SPECIFICATIONS

HD1221 12″ 2-Way Compact High-Definition Powered Loudspeaker

Acoustic Performance
Frequency response: (-10dB) 55Hz-20kHz
Frequency response: (-3dB) 65Hz-18kHz
Horizonal coverage: (-6dB) 90° averaged, 2kHz to 10kHz (HF horn can be rotated 90° if desired)
Vertical Coverage: (-6dB) 50° averaged, 2kHz to 10kHz
Max peak SPL (calculated): 133dB (Calculated from driver sensitivity and amplifier power)
Max peak SPL (measured): 124dB (Measured with pink noise, free field at 1 meter, before limiting)
Crossover Point: 1.5kHz

Input / Output
Input Type: Female XLR balanced
Input Impedance: 11 kΩ balanced
Loop Out: Male XLR balanced

Voicing Mode
Contour: LF, HF boost
Normal: Nominally flat
Monitor: 100Hz HPF, broad cut @ 3kHz

Low-Frequency Power Amplifier
Rated Power: 500W rms, 1000W peak
Rated THD: < 0.03%
Cooling: Convection Extrusion
Design: Class D

High-Frequency Power Amplifier
Rated Power: 100W rms, 200W peak
Rated THD: < 0.03%
Cooling: Convection Extrusion
Design: Class D

Low-Frequency Transducer
Diameter: 12″ / 305mm
Voice Coil Diameter: 3″ / 76mm
Diaphragm Material: Paper
Magnet Material: Neodymium

High-Frequency Transducer
Voice Coil Diameter: 1.75″ / 44mm
Horn Entry Diameter: 1″ / 25mm
Diaphragm Material: Heat treated titanium
Magnet Material: Ferrite

Line Input Power
US: 100-120 VAC, 50-60Hz, 200W
EU, CN: 200-240 VAC, 50-60Hz, 200W
AC Connector: 3-pin IEC 250 VAC

Safety Features
RMS limiting, Power supply and amplifier thermal protection

Construction Features
Basic Design: Asymmetrical monitor, 60° tilt
Material: 15mm exterior grade premium birch plywood
Finish: High durability black paint
Handles: One on each side, one on top
Grille: Powder-coatedgalvanized steel
Display LEDs: Power ON, Voicing Mode selection, Sig / Limit,
Thermal protection, Front Power Light ON
Fly Points: Twelve M10 x 1.5mm
Monitor Angle: 60°
Operating Temperature: 0°-40°C, 32°-104°F

Physical properties
Height: 24″ / 610mm
Width: 15.2″ / 386mm
Depth: 15.0″ / 381mm
Monitor position depth: 16.2: / 412mm
Net weight: 50lb. / 22.7kg

Mounting Methods
Floor mount, pole mount, or fly via 12 integrated M10 mounting
points (using M10 x 1.5 x 37mm forged shoulder eyebolts)

Additional information

Weight 50 lbs
Dimensions 15 × 15.2 × 24 in

You may also like…